Installation steps for straight thread rebar coupler:

1. Reinforcement in place: Send the rebar that has passed the wire head inspection to the construction site.

2. Tightening of the joint: Use a working wrench with a straight threaded rebar coupler to tighten the connecting socket.

3. Marking: Mark the tightened rebar sleeve to distinguish it from the untightened sleeve.

4. Construction inspection: quality inspection of the finished joints.

5. Bind other steel bars. When using the steel bar straight thread sleeve, you must pay attention to the installation matters, so as to avoid some unnecessary technical problems, which will affect the quality of the straight thread rebar coupler.