Die Head Threading Machine, also known as electric threading, electric pipe cutting threading machine, wire reeling machine, pipe thread threading machine, steel bar threading machine, consists of body, motor, reduction box, pipe chuck, die head, cutter holder , Feeding device and cooling system.

The threading machine is to electrify the manual pipe thread stranding plate before 1980, which makes the pipe thread processing during pipe installation easy and fast, and reduces the labor intensity of pipe installation workers. Threading machine consists of: body, motor, reduction box, pipe chuck, die head, cutter holder, feeder, cooling system.

In order to save manufacturing costs, there are two types of threading machines, heavy and light, on the market

The heavy-duty threading machine is an all-aluminum alloy body, and the model code is generally 100 or 100A. The price is relatively high, the carriage span is large, the stability is good, and it is durable. The general net weight is 175 kilograms, which is suitable for a fixed site to process pipe threads in large quantities.

The lower part of the light threading machine is generally made of 2mm thick iron plate, the upper part is made of aluminum alloy, the model code is generally 100C or 100III or R4-II, the price is low, the carriage span is small, the stability is not very good, but the weight is light, Generally, the net weight is about 130 kg, which is convenient to carry and suitable for those who work frequently.

High-efficiency threading machine: By increasing the power of the motor and strengthening the related parts of the reducer, the threading speed is increased to improve the threading efficiency. Because the high speed can discharge the debris faster, the threading effect is also better than that of the ordinary machine. When the threading machine is working, first put the pipe to be threaded into the pipe chuck, hit it tightly, press the start switch, the pipe will rotate with the chuck, adjust the size of the die opening on the die head, and set the wire Then turn the feed handwheel clockwise to make the die cutter on the die head close to the end of the rotating pipe with a constant force, the die cutter will automatically cut the wire, and the cooling system will automatically spray oil for the die cutter to cool. , When the wire mouth is processed to the preset length, the die cutter will automatically open, and the wire mouth processing is finished. Turn off the power, knock the chuck open, and take out the tube.

The threader also has the function of cutting the pipe: put the pipe into the pipe chuck, hit the clamp, start the switch, put down the cutter holder on the feed device, and pull the feed handwheel to move the blade on the cutter holder to When you want to cut the length point, gradually rotate the handle on the cutter, so that the blade squeezes the rotating tube, and the tube is squeezed and cut by the blade after 4 turns and 5 turns.