Fast rebar coupler is a simple and fast alternative for joining small diameter steel reinforcement bars (rebar). It is especially used quickly and on-site when the iron ore is short, or there is not enough distance for overlapping.

The system consists of an oval-shaped rebar coupler and a wedge pin quickly connects the rebars. The overlapping bars in the steel rebar coupler are assembled in seconds. The assembly is completed by operating the wedge pin with a portable hydraulic tool between the bars. Typical applications include bridge repair, road repair, building extensions, spiral reinforcement, stirrups and ties, and pile extensions.

• Minimizes the length of reinforcing bar (rebar) Prevents excessive breakage in reinforcement installations.

• No special control is required.

• The bars can be cut to an approximate size between the reinforcement bar (rebar).

• Provides in-place insertion with minimum anchor length requirement.

• Low cost.

• Fast and easy to use.

• Visual inspection is possible.

• Connections can be made in almost all weather conditions.

• Light manual hydraulic pin driver designed for minimum cleaning conditions.